Y VALVE & MINI Y VALVE – LEAK PROOF WITH INTERNAL PRESSURIZATION

The Y valve is 2/3 pressurized leak-tight valve, pneumatically piloted. It can be used either ways for different purposes: It is used for any other tight application having to be leak-tight guaranteed with a Y. The most common utilization of the Y valve is chained for 2 cycles on two different components. A 24V solenoid is mounted on the valve and is controlled or from the valve code of the instrument, either from a PLC.

Also the Y valve can be used for having 2 different reference volumes whenever different components have to be tested on the line. External dump is used to avoid water, oil, dust, particles to reach the ATEQ unit when dumping through the main valve block.

It’s possible to use several Y valves of series to test several parts by only one instrument. The Y valve can also be used for checking calibration of the instrument. In this case, a master calibrated leak will be installed in one of the Y valve outputs.

Y VALVE : FEATURES

• Fluid supported : Air ; Gas (following prior consultation of our technical services department)
• Differential pressure : 0 – 10 bar with pressurized valve compressed
• Max. allowed pressure : 12 bar
• Ambient temperature range : 0°C to + 55°C
• Control fluid : Dry clean air supply
• Max. control pressure : 10 bar
• Min. control pressure : 4 bar
• PNormal control pressure : 6 bar
• Flow diameter : 4 mm (Y valve) – 2 mm (mini Y valve)
• Life expectancy : 4 million cycles
• Dimensions : 110 x 27 x 190 (Y valve) – 110 x 27 x 117 (mini Y valve)
• Weight with controller : 695 g (Y valve) – 450 g (mini Y valve)

MEASUREMENT CHARACTERISTICS :

Y VALVE : SPECIFICATIONS

PRESENTATION
- Weight : 695 g (Y valve)
  450 g (mini Y valve)
PHYSICAL
- Dimensions : (in mm) 110 x 27 x 190 (Y valve) / 110 x 27 x 117 (mini Y valve)
TEMPERATURE
- Ambiant : +0°C to +55°C

Y VALVE : OPTIONS

Position detection :
The Y valve can have in option a detection of position of the drawer, in order to have the certainty of the movement of the drawer in the valve.
An indicator lights to indicate the position work of the drawer, this indicator is visible by transparency behind the plastic cap on the spring side.