MEDICAL DEVICE LEAK TESTING
ATEQ USA’s products are in frequent use for medical device leak testing. End users require a high-degree of confidence in the medical field, like when leak testing ventilators, as they are often used to deliver or extract fluids to or from a specific part of the body. If a leak existed, then fluids could be inadvertently sent to the incorrect location, or the wrong fluids could be removed. Either circumstance can result in dangerous consequences, and expose hazardous situations to healthcare professionals and patients. Ultimately, manufacturers can be held liable for the failures of their products. Therefore, having a robust testing methodology can minimize these risks by identifying components that don’t meet established production standards.
ATEQ is Available to Provide Testers and Consulting For Ventilator Leak Testing Applications.
- Flow Testing Up to 300 L/min
- Differential Transducer Measurement Down to 50 Pa Full Scale 0.5 cm H2O
- Leak Testing Down to 0.1 cc/min ventilator leak testing
Medical device manufacturers continue to increase the expectations of their quality standards in order to decrease and minimize risk. Therefore, medical device leak testing is of the utmost importance. ATEQ’s products are able to meet these demands. For example, the Hydra, Four Channel Leak Tester, allows for up to four separate channels of testing. Each leak test channel its own leak test transducer with less than 1.5 cc of internal volume.
Our products can be used in a manual or automated environment, and have secure features which limit who has access to entering and altering the testing parameters. ATEQ appreciates that when performing leak detection in medical devices, this may often include testing every single production piece. ATEQ’s leak detection equipment is built for high capacity testing, and includes quick access to calibrated leaks to verify that testing is progressing as expected.
Below are some examples of products where ATEQ’s products are used today for medical device leak testing. Our sales application engineers are experts, so if you have a need for precise testing, contact us today!
“ATEQ is dedicated to your long-term success”
Below are some examples of products where ATEQ’s products are used today for medical device leak testing. Our sales application engineers are experts, so if you have a need for precise testing, contact us today!
Blisters
Catheters
Condoms
Glass pharmaceutical bottle
Hydraulic connector
Plastic bag
Plastic pharmaceutical bottle
Pneumatic connector
Pharmaceutical aerosol
Operating gloves
Water softener
Dialysis equipment
Intravenous drip
Inhaler
Spray
Flexible pipes
Plastic valve
Pressure regulator
Pharmaceutical Aerosol Pump
Pharmaceutical Aerosol Pump Valve
Syringe
Pressure switch
Contact ATEQ USA for sales information, general questions, press release information and marketing inquiries.